In North Dakota, a standard 300 sqft deck runs roughly $19,823–$28,502 depending on material. Labor runs -5% below the national average, and permits typically cost about $240. Frost-line footings add 8–12% to the build.
Cost by material — 300 sqft deck in North Dakota
Standard 12×25 deck, 3–5 ft off ground, composite balusters, one stair run. Includes framing, footings, railing, stairs, permit, and 8% contingency.
Pressure-Treated Pine
15–20 yrs · Stain every 2–3 yrs
$66/sqft
$19,823
Cedar / Redwood
20–25 yrs · Seal every 2–3 yrs
$73/sqft
$22,046
Composite (Trex, TimberTech)
25–30 yrs · Rinse yearly
$86/sqft
$25,712
PVC / Cellular
30+ yrs · Rinse yearly
$95/sqft
$28,502
Ipe / Cumaru Hardwood
40+ yrs · Oil annually (optional)
$101/sqft
$30,440
What drives cost in North Dakota
Labor (95% of national avg). Labor runs close to the US average.
Permits (~$240). Most North Dakota municipalities require a building permit for any deck over 30 inches. Inspections typically happen at the footing and final stages.
Frost-line footings. North Dakota's frost line forces footings 36–48 inches deep, adding roughly $50–80 per pier and extra concrete volume. Budget 8–12% more than warm-climate equivalents.
Materials. Pressure-treated pine is the cheapest per sqft; composite (Trex, TimberTech) is 2–3× more but almost maintenance-free. Most North Dakota homeowners picking a mid-tier build land on composite.
North Dakota deck cost — FAQ
How much does a deck cost in North Dakota?+
In North Dakota, a standard 300 sqft deck runs about $19,823 for pressure-treated pine to $30,440 for ipe hardwood. Most homeowners picking mid-tier composite (Trex, TimberTech) land near $25,712 — roughly $86 per square foot installed.
Do I need a permit for a deck in North Dakota?+
Most North Dakota municipalities require a building permit for any deck over 30 inches off the ground or attached to a house. Permit fees typically run around $240. Inspections usually happen at the footing stage and at final.
What's the cheapest deck material in North Dakota?+
Pressure-treated pine at about $66 per square foot installed. Cedar is the next step up at $73/sqft. For long-term cost-of-ownership (accounting for stain and maintenance), composite at $86/sqft often wins past year 12.
How much is labor for a deck in North Dakota?+
North Dakota labor runs 95% of the US average — 5% below the national baseline. Labor accounts for 40–55% of total deck cost. On a 300 sqft composite build, that's roughly $12,342 of the total.
Do I need frost-line footings in North Dakota?+
Frost-line footings push 36–48 inches deep in this state, adding roughly 8–12% to total cost vs warm-climate equivalents. Most North Dakota jurisdictions require footings below the local frost line, verified at inspection.
Does a deck add home value in North Dakota?+
Yes. Nationally, a new deck returns 50–70% of its cost at resale. In North Dakota's climate, an outdoor living space is especially valued despite the shorter usable season. Real estate appraisers typically credit deck value at 50–65% of installed cost; buyers tend to value it even higher when a property is actively listed.
Ready for your own estimate?
Adjust size, material, height, and features to fit your yard. Get a North Dakota-specific number in under 2 minutes.